Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SGD 100
Suction and pressure hose
Product image
Properties
| Application |
Low pressure suction and pressure systems |
| Inner layer |
oil resistant synthetic rubber |
| Insert |
highly tear-resistant synthetic textile insert and steel wire spiral |
| Outer layer |
synthetic rubber with high ozone, abrasion, and weather resistance |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
100 °C |
| Media |
Mineral oil Water-oil emulsions |
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Vacuum (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|---|
| SGD 125 | 25 | 16 | 1" | 25,4 | 40 | 25,0 | 75 | 0,9 | 152 |
| SGD 132 | 31 | 20 | 1.1/4" | 32,0 | 46 | 25,0 | 75 | 0,9 | 192 |
| SGD 140 | 38 | 24 | 1.1/2" | 38,0 | 54 | 25,0 | 75 | 0,9 | 228 |
| SGD 150 | 51 | 32 | 2" | 50,8 | 67 | 25,0 | 75 | 0,9 | 305 |
| SGD 163 | 63 | 40 | 2.1/2" | 63,5 | 82 | 25,0 | 75 | 0,9 | 381 |
| SGD 176 | 76 | 48 | 3" | 76,2 | 96 | 25,0 | 75 | 0,9 | 457 |
| SGD 1102 | 100 | 64 | 4" | 101,6 | 125 | 25,0 | 75 | 0,9 | 610 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.