SILIKON BL
Silicone hose, blueProduct image
Properties
Application |
Cooler hose |
Special features |
very highly resistant to high and low temperatures very good resistance to coolants, oils and cleaning agents very good resistance to ozone, UV and classic aging processes the suppleness of the silicone enables easy installation |
Standard |
SAE J20R1 CLASS A |
Inner layer |
Silicone blue |
Insert |
Textile insert |
Outer layer |
Silicone blue |
Colour |
blue |
Temp. min. |
-60 °C |
Temp. max. |
200 °C |
Media |
Cooling fluids hot air |
Item
Sort upwards
Sort downwards
Identification | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Wall thickness (mm) |
Burst pressure (bar) |
---|---|---|---|---|---|
SILIKON 08-4 BL | 8 | 16 | 20,0 | 4,0 | 60 |
SILIKON 10-4 BL | 10 | 18 | 20,0 | 4,0 | 60 |
SILIKON 12-4 BL | 12 | 20 | 19,0 | 4,0 | 57 |
SILIKON 14-4 BL | 14 | 22 | 18,0 | 4,0 | 54 |
SILIKON 16-4 BL | 16 | 24 | 15,0 | 4,0 | 45 |
SILIKON 18-4 BL | 18 | 26 | 13,0 | 4,0 | 39 |
SILIKON 20-4 BL | 20 | 28 | 12,0 | 4,0 | 36 |
SILIKON 22-4 BL | 22 | 30 | 12,0 | 4,0 | 36 |
SILIKON 25-4.5 BL | 25 | 34 | 11,0 | 4,5 | 33 |
SILIKON 28-4.5 BL | 28 | 37 | 10,0 | 4,5 | 30 |
SILIKON 30-4.5 BL | 30 | 39 | 10,0 | 4,5 | 30 |
SILIKON 32-4.5 BL | 32 | 41 | 9,0 | 4,5 | 27 |
SILIKON 35-4.5 BL | 35 | 44 | 8,0 | 4,5 | 24 |
SILIKON 38-4.5 BL | 38 | 47 | 7,0 | 4,5 | 21 |
SILIKON 40-4.5 BL | 40 | 49 | 7,0 | 4,5 | 21 |
SILIKON 45-4.5 BL | 45 | 54 | 6,0 | 4,5 | 18 |
SILIKON 48-4.5 BL | 48 | 57 | 6,0 | 4,5 | 18 |
SILIKON 50-4.5 BL | 50 | 59 | 6,0 | 4,5 | 18 |
SILIKON 57-4.5 BL | 57 | 66 | 5,0 | 4,5 | 15 |
SILIKON 60-4.5 BL | 60 | 69 | 5,0 | 4,5 | 15 |
SILIKON 65-5.5 BL | 65 | 76 | 5,0 | 5,5 | 15 |
SILIKON 70-5.5 BL | 70 | 81 | 4,0 | 5,5 | 12 |
SILIKON 80-6 BL | 80 | 92 | 3,0 | 6,0 | 9 |
the above values relate to an ambient temperature (20 °C); we recommend a 20 % operating pressure reduction for every 100 °C
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.