Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
IGRL B
Rod seal IGRL-B
Product image
Properties
| Design |
Rod packing set |
| Operating pressure |
up to 700 bar |
| Sliding speed max. |
15,0 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
110 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
first bend the O-ring and then the PTFE ring into a kidney shape and press into the locating groove (from 30 mm). |
| Material |
(1) Dynamic seal: PTBR (2) Static seal: NBR |
| Application |
Hydraulics |
Description
Low spatial requirement.
High extrusion resistance.
low break-loose torque and dynamic friction
Long service life.
Item
Sort upwards
Sort downwards
 Identification |
d (mm) |
D (mm) |
L (mm) |
|---|---|---|---|
| IGRL 0200 B 554470 | 20 | 27,3 | 3,2 |
| IGRL 0220 B 554470 | 22 | 29,3 | 3,2 |
| IGRL 0250 B 554470 | 25 | 32,3 | 3,2 |
| IGRL 0280 B 554470 | 28 | 35,3 | 3,2 |
| IGRL 0300 B 554470 | 30 | 37,3 | 3,2 |
| IGRL 0350 B 554470 | 35 | 42,3 | 3,2 |
| IGRL 0360 B 554470 | 36 | 43,3 | 3,2 |
| IGRL 0400 B 554470 | 40 | 50,7 | 4,2 |
| IGRL 0450 B 554470 | 45 | 55,7 | 4,2 |
| IGRL 0500 B 554470 | 50 | 60,7 | 4,2 |
| IGRL 0550 B 554470 | 55 | 65,7 | 4,2 |
| IGRL 0560 B 554470 | 56 | 66,7 | 4,2 |
| IGRL 0600 B 554470 | 60 | 70,7 | 4,2 |
| IGRL 0650 B 554470 | 65 | 75,7 | 4,2 |
| IGRL 0700 B 554470 | 70 | 80,7 | 4,2 |
| IGRL 0800 B 554470 | 80 | 90,7 | 4,2 |
| IGRL 0900 B 554470 | 90 | 100,7 | 4,2 |
| IGRL 1000 B 554470 | 100 | 110,7 | 4,2 |
| IGRL 1300 B 554470 | 130 | 140,7 | 4,2 |
Ordering information
We are able to produce GR/IGRL seals with diameters 20 to 510 mm with short lead times. Dimensions can be calculated from table 44.1.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.