Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
IBU
Rod seal, IBU
Product image
Properties
| Design |
rod seal |
| Operating pressure |
up to 500 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-40 °C |
| Temp. max. |
100 °C |
| Colour |
blue / brown |
| Material |
(1) seal: PU10 (2) Support ring: POM |
Description
As buffer seal.
Easy assembly.
Easy installation space at the same time small dimensions.
High abrasion resistance.
Good extrusion resistance.
High temperature resistance.
Note
Gap e up to max 0,3 mm
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
|---|---|---|---|
| IBU 60 | 75 | 60 | 9,5 |
| IBU 65 | 80 | 65 | 9,5 |
| IBU 70 | 85 | 70 | 9,5 |
| IBU 75 | 90 | 75 | 9,5 |
| IBU 80 | 95 | 80 | 9,5 |
| IBU 90 | 105 | 90 | 9,5 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.