CH NEI
Chevron ring CH-NEI
Product image
![CH NEI CH NEI](/data/img/product/CH-NEI_FOTO.jpg)
![CH NEI - data/img/product/CH_CH-NEI_1_Zeichnung.jpg data/img/product/CH_CH-NEI_1_Zeichnung.jpg - CH NEI](/data/img/product/CH_CH-NEI_1_Zeichnung.jpg)
Properties
Design |
Chevron ring |
Operating pressure |
up to 400 bar |
Sliding speed max. |
0,5 m/s |
Temp. min. |
-30 °C |
Temp. max. |
110 °C |
Media |
Mineral oils Water emulsions |
Installation |
in open grooves |
Material |
(1) Chevron ring: 1 x NBR, + 2 x fabric-reinforced NBR (2) Support ring: acetal resin / PTBR (3) Thrust ring: laminated fabric-reinforced NBR (4) Support ring: acetal resin / PTBR |
Application |
Hydraulics |
Description
High temperature resistance.
for difficult working conditions such as hydraulic shocks,
Strong vibrations or poor surfaces.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
d (mm) |
D (mm) |
L (mm) |
---|---|---|---|
CH-177 118-NEI | 30,00 | 45,00 | 22,20 |
CH-200 141-NEI | 36,00 | 51,00 | 24,00 |
CH-216 157-NEI | 40,00 | 55,00 | 22,62 |
CH-236 177-NEI | 45,00 | 60,00 | 22,22 |
CH-255 196-NEI | 50,00 | 65,00 | 24,60 |
CH-255 196-1-NEI | 50,00 | 65,00 | 26,00 |
CH-284 204-NEI | 52,00 | 72,00 | 32,50 |
CH-295 236-NEI | 60,00 | 75,00 | 19,00 |
CH-299 236-NEI | 60,00 | 76,00 | 29,00 |
CH-314 236-NEI | 60,00 | 80,00 | 32,15 |
CH-326 275-NEI | 70,00 | 83,00 | 25,00 |
CH-334 248-NEI | 63,00 | 85,00 | 32,00 |
CH-334 255-NEI | 65,00 | 85,00 | 29,00 |
CH-354 275-NEI | 70,00 | 90,00 | 30,00 |
CH-393 314-NEI | 80,00 | 100,00 | 30,00 |
CH-413 334-1-NEI | 85,00 | 105,00 | 30,00 |
CH-511 433-NEI | 110,00 | 130,00 | 30,00 |
Ordering information
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.
Product versions
![](/images/up.gif)
This product is also available in the following designs:
- CH
- Chevron ring CH, (1) Chevron ring: 1 x NBR, + 2 x fabric-reinforced NBR
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.