Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
IGR B
Rod seal IGR-B
Product image
Properties
| Design |
Rod packing set |
| Operating pressure |
up to 700 bar |
| Sliding speed max. |
15,0 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
110 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
first bend the O-ring and then the PTFE ring into a kidney shape and press into the locating groove (from 30 mm). |
| Material |
(1) Dynamic seal: PTBR (2) Static seal: NBR |
| Application |
Hydraulics |
Description
Low spatial requirement.
High extrusion resistance.
low break-loose torque and dynamic friction
Long service life.
Item
Sort upwards
Sort downwards
 Identification |
d (mm) |
D (mm) |
L (mm) |
|---|---|---|---|
| IGR 0050 B 554470 | 5 | 9,9 | 2,2 |
| IGR 0080 B 554470 | 8 | 15,3 | 3,2 |
| IGR 0100 B 554470 | 10 | 17,3 | 3,2 |
| IGR 0120 B 554470 | 12 | 19,3 | 3,2 |
| IGR 0140 B 554470 | 14 | 21,3 | 3,2 |
| IGR 0150 B 554470 | 15 | 22,3 | 3,2 |
| IGR 0160 B 554470 | 16 | 23,3 | 3,2 |
| IGR 0180 B 554470 | 18 | 25,3 | 3,2 |
| IGR 0200 B 554470 | 20 | 30,7 | 4,2 |
| IGR 0220 B 554470 | 22 | 32,7 | 4,2 |
| IGR 0240 B 554470 | 24 | 34,7 | 4,2 |
| IGR 0250 B 554470 | 25 | 35,7 | 4,2 |
| IGR 0280 B 554470 | 28 | 38,7 | 4,2 |
| IGR 0300 B 554470 | 30 | 40,7 | 4,2 |
| IGR 0320 B 554470 | 32 | 42,7 | 4,2 |
| IGR 0350 B 554470 | 35 | 45,7 | 4,2 |
| IGR 0360 B 554470 | 36 | 46,7 | 4,2 |
| IGR 0370 B 554470 | 37 | 47,7 | 4,2 |
| IGR 0380 B 554470 | 38 | 53,1 | 6,3 |
| IGR 0400 B 554470 | 40 | 55,1 | 6,3 |
| IGR 0420 B 554470 | 42 | 57,1 | 6,3 |
| IGR 0450 B 554470 | 45 | 60,1 | 6,3 |
| IGR 0480 B 554470 | 48 | 63,1 | 6,3 |
| IGR 0500 B 554470 | 50 | 65,1 | 6,3 |
| IGR 0550 B 554470 | 55 | 70,1 | 6,3 |
| IGR 0560 B 554470 | 56 | 71,1 | 6,3 |
| IGR 0600 B 554470 | 60 | 75,1 | 6,3 |
| IGR 0630 B 554470 | 63 | 78,1 | 6,3 |
| IGR 0650 B 554470 | 65 | 80,1 | 6,3 |
| IGR 0700 B 554470 | 70 | 85,1 | 6,3 |
| IGR 0750 B 554470 | 75 | 90,1 | 6,3 |
| IGR 0800 B 554470 | 80 | 95,1 | 6,3 |
| IGR 0850 B 554470 | 85 | 100,1 | 6,3 |
| IGR 0900 B 554470 | 90 | 105,1 | 6,3 |
| IGR 0950 B 554470 | 95 | 110,1 | 6,3 |
| IGR 1000 B 554470 | 100 | 115,1 | 6,3 |
| IGR 1050 B 554470 | 105 | 120,1 | 6,3 |
| IGR 1100 B 554470 | 110 | 125,1 | 6,3 |
| IGR 1150 B 554470 | 115 | 130,1 | 6,3 |
| IGR 1200 B 554470 | 120 | 135,1 | 6,3 |
| IGR 1250 B 554470 | 125 | 140,1 | 6,3 |
| IGR 1300 B 554470 | 130 | 145,1 | 6,3 |
| IGR 1400 B 554470 | 140 | 155,1 | 6,3 |
| IGR 1500 B 554470 | 150 | 165,1 | 6,3 |
| IGR 1600 B 554470 | 160 | 175,1 | 6,3 |
| IGR 1700 B 554470 | 170 | 185,1 | 6,3 |
| IGR 1800 B 554470 | 180 | 195,1 | 6,3 |
| IGR 1900 B 554470 | 190 | 205,1 | 6,3 |
| IGR 2000 B 554470 | 200 | 220,5 | 8,1 |
| IGR 2200 B 554470 | 220 | 240,5 | 8,1 |
| IGR 2500 B 554470 | 250 | 270,5 | 8,1 |
| IGR 2800 B 554470 | 280 | 304,0 | 8,1 |
| IGR 3600 B 554470 | 360 | 384,0 | 8,1 |
Ordering information
We are able to produce GR/IGRL seals with diameters 20 to 510 mm with short lead times. Dimensions can be calculated from table 44.1.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.