HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

IGR B

Rod seal IGR-B
Hide product imageProduct image
IGR B data/img/product/IGR-B_Zeichnung.jpg - IGR B
Hide propertiesProperties
Design Rod packing set
Operating pressure up to 700 bar
Sliding speed max. 15,0 m/s
Temp. min. -30 °C
Temp. max. 110 °C
Media Mineral oils
Water emulsions
Installation first bend the O-ring and then the PTFE ring into a kidney shape
and press into the locating groove (from 30 mm).
Material (1) Dynamic seal: PTBR
(2) Static seal: NBR
Application Hydraulics
Hide descriptionDescription

Low spatial requirement.
High extrusion resistance.
low break-loose torque and dynamic friction
Long service life.

Hide product tableItem

Sort upwards

Sort downwards

Hide ordering informationOrdering information

We are able to produce GR/IGRL seals with diameters 20 to 510 mm with short lead times. Dimensions can be calculated from table 44.1.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.