Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
B FPM-C
Rod seal B-FPM/C
Product image
Properties
| Design |
rod seal |
| Operating pressure |
up to 250 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-10 °C |
| Temp. max. |
150 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
in closed grooves in open grooves |
| Material |
FPM-C |
| Application |
Hydraulics |
Description
Low-friction seal.
Extremely good sealing effect at low pressure.
Simple solution.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
|---|---|---|---|
| B 094 063-1 FPM-C | 24 | 16 | 6,4 |
| B 102 070-1 FPM-C | 26 | 18 | 6,4 |
| B 110 078-1 FPM-C | 28 | 20 | 6,4 |
| B 118 086-1 FPM-C | 30 | 22 | 6,4 |
| B 129 098-1 FPM-C | 33 | 25 | 6,4 |
| B 141 110 FPM-C | 36 | 28 | 6,4 |
| B 149 118 FPM-C | 38 | 30 | 6,4 |
| B 157 118 FPM-C | 40 | 30 | 7,5 |
| B 157 125-1 FPM-C | 40 | 32 | 6,4 |
| B 169 137 FPM-C | 43 | 35 | 6,4 |
| B 173 141 FPM-C | 44 | 36 | 6,4 |
| B 188 157 FPM-C | 48 | 40 | 6,4 |
| B 196 157 FPM-C | 50 | 40 | 11,0 |
| B 216 177 FPM-C | 55 | 45 | 8,0 |
| B 236 196 FPM-C | 60 | 50 | 8,0 |
| B 236 196-1 FPM-C | 60 | 50 | 10,0 |
| B 255 216-1 FPM-C | 65 | 55 | 8,0 |
| B 275 236 FPM-C | 70 | 60 | 8,0 |
| B 283 236 FPM-C | 72 | 60 | 9,6 |
| B 322 275-1 FPM-C | 82 | 70 | 9,6 |
| B 362 314 FPM-C | 92 | 80 | 9,6 |
Product versions
This product is also available in the following designs:
- B Dichtung
- Rod seal B, fabric-reinforced NBR
- B M
- Rod seal B-M, fabric-reinforced NBR
- B NEI
- Rod seal B-NEI, (1) Seal: fabric-reinforced NBR
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.