Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-FI REGL METALLBEHAE MANO MULTIF M
Filter regulators with metal bowl and pressure gauge
Product image
Properties
| Input pressure |
Max. 16 bar (also for metal tank!) |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Pore size in filter element |
5 μm |
| Sealant |
NBR |
| Spring bonnet |
POM-brass |
| Housing |
Die-cast zinc |
| Drain valve |
Semi-automatic |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Reversible diaphragm pressure regulators, independent of inlet pressure, with secondary ventilation, in combination with a centrifugal separator. The pressure setting can be locked by pressing in the handwheel.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN | Size |
|---|---|---|---|---|---|---|---|---|---|
| K- 07 25 00 61 | G 1/8 | 0.5 - 10 bar | 950 | 40,0 | 162.0 mm | 63,0 | 99,0 | 5 | 0 |
| K- 07 25 00 64 | G 1/4 | 0.5 - 10 bar | 1100 | 40,0 | 162.0 mm | 63,0 | 99,0 | 5 | 0 |
Ordering information
Lockable filter pressure regulators available on request. If several devices in the »multifix-mini« Series are assembled together, the maximum working pressure is 12 bar.
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-SCHALTTAFELMUTTER
- Nut
- K-KOPPELPAKET MEHR
- Coupling packet
- K-ERSATZBEHAELTER MULTI MINI
- Spare tank »multifix-mini« & »standard-mini«
- K-PC-BEHAELTER FILTER MULTIFIX
- Polycarbonate tank filter
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-FILTERELEMENT
- Filter element
- K-AUTOMAT ABLASSVENTIL
- Automatic drain valve
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.