Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-FI SPEZI PC-BEHAEL H K STANDARD
Special filters with polycarbonate bowl and bowl guard, with semi-automatic drain valve to G 1/2 and manual drain valve from G 3/4
Product image
Properties
| Input pressure |
Max. 16 bar (polycarbonate bowl / bowl guard), Max. 25 bar (metal bowl) |
| Media temperature |
max. 50 °C |
| Ambient temperature |
Max. 50 °C |
| Efficiency |
99.999 % |
| Pore size in filter element |
0.01 μm |
| Housing |
Die-cast zinc, painted silver |
| Flow rate measurement |
At P2 = 6 bar and pressure drop Δp = 1 bar |
Description
For all applications with particularly strict compressed air purity requirements. The separating efficiency of these filters permits very fine oil vapour particles and micro-fine suspended particles to be filtered. A standard filter should always be connected upstream to trap coarse impurities and protect the micro-filter inserts.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Flow rate (L/min) |
A (mm) |
C (mm) |
D (mm) |
H (mm) |
DN |
|---|---|---|---|---|---|---|---|
| K- 07 25 10 75 | G 1/4 | 380 | 48,0 | 14,0 | 131,6 | 38,0 | 6 |
| K- 07 25 10 78 | G 3/8 | 380 | 48,0 | 14,0 | 131,6 | 38,0 | 6 |
| K- 07 25 10 80 | G 3/8 | 720 | 70,0 | 16,0 | 145,7 | 50,0 | 10 |
| K- 07 25 10 82 | G 1/2 | 1250 | 79,0 | 18,0 | 168,4 | 50,0 | 15 |
| K- 07 25 10 85 | G 3/4 | 7000 | 133,0 | 36,0 | 206,0 | 134,0 | 20 |
| K- 07 25 10 88 | G 1 | 7000 | 133,0 | 36,0 | 206,0 | 120,0 | 25 |
Spare parts
- K-HALTERBAUSATZ STANDARD
- Holder
- K-FILTERELEMENT STANDARD
- Filter element
- K-SCHUTZKORB G
- Protective cage
- K-XV AGM MS NI
- Double nipples, parallel male thread, nickel-plated brass
- K-LOESBARE DOPPELNIPPEL MS
- Double nipples
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.