Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-HOCHLEIST DRUCKREGLER
Heavy-duty pressure regulators
Product image
Properties
| Input pressure |
Max. 25 bar |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Flow rate |
50000 l/min |
| Sealant |
NBR |
| Housing |
Aluminium, painted silver |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving designfor very high flow rates. Separate indication of input and working pressure on two pressure gauges. The pressure setting can be locked by pushing the knob down. We recommend always using these controllers in conjunction with our K-07250607 and K-07250609 filters.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | A (mm) |
B | DN |
|---|---|---|---|---|---|
| K- 07 25 08 03 | G 1 1/2 | 0.1 - 3 bar | 188,0 | 261.0 mm | 50 |
| K- 07 25 08 04 | G 1 1/2 | 0.2 - 6 bar | 188,0 | 261.0 mm | 50 |
| K- 07 25 08 05 | G 1 1/2 | 0.5 - 10 bar | 188,0 | 261.0 mm | 50 |
| K- 07 25 08 06 | G 1 1/2 | 0.5 - 16 bar | 188,0 | 261.0 mm | 50 |
| K- 07 25 08 07 | G 2 | 0.1 - 3 bar | 160,0 | 261.0 mm | 50 |
| K- 07 25 08 08 | G 2 | 0.2 - 6 bar | 160,0 | 261.0 mm | 50 |
| K- 07 25 08 09 | G 2 | 0.5 - 10 bar | 160,0 | 261.0 mm | 50 |
| K- 07 25 08 10 | G 2 | 0.5 - 16 bar | 160,0 | 261.0 mm | 50 |
Spare parts
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-LOESBARE DOPPELNIPPEL MS
- Double nipples
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.