HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-WV 3/2 ELK 24 VDC HANSA

3/2-way valves, electrically operated, with 24 VDC / 2.5 W solenoid
Hide product imageProduct image
K-WV 3/2 ELK 24 VDC HANSA data/img/product/00042634_0.gif - K-WV 3/2 ELK 24 VDC HANSA
Hide propertiesProperties
Input pressure 2 - 10 bar
Temp. range -10 °C to +50 °C
Media Compressed air
rush-in power alternating current 50Hz 2,2 VA
Duty cycle ED 100 %
Electrical connection Connector type C, ISO 15217, 2 poles +PE
holding power alternating current 50Hz 1,6 VA
Power consumption DC 2,5 W
Protection IP IP 65
Connection thread Material: Die-cast zinc
Housing Material: Grivory® (PA 66)
Flow rate measurement At P2 = 6 bar, pressure drop Δp = 1 bar
Hide descriptionDescription

Pneumatic systems or parts of systems can be switched on and off by means of an electrical signal. When they are switched off, the system is exhausted at the same time.

Hide informationNote

Further information on request

Hide product tableItem

Sort upwards

Sort downwards

Hide ordering informationOrdering information

Valves are also available with coil 110 V AC, 50 Hz and in a pneumatically operated version. Please ask for more information.

Hide product accessoriesAccessories
K-SCHALLDAE SINTERBR S
Silencers, sintered bronze, slotted
K-SCHALLDAE SINTERBR GE MS1
Silencers, sintered bronze, with brass hexagon nut and brass thread
Hide product spare partsSpare parts
K-HALTERBAUSATZ HANSA
Holder HANSA
K-VORSTEUERVENTIL HANSA
Replacement solenoid HANSA
K-GERAETESTECKER FORM C
Connector
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.