Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
W90 IN HJ
Screw-on socket, IGN AGJ angle 90°
Product image
Properties
| Connection 1 |
NPT internal thread |
| Sealing form 1 |
thread seal |
| Connection 2 |
UN/UNF external threads |
| Sealing form 2 |
74° outer cone |
| Design |
Screw-on socket |
| Construction |
Angle 90° |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
G1 | G2 | AF (mm) |
|---|---|---|---|
| W90 IN 02 HJ 04 | 1/8" -27 NPT | 7/16"-20 UNF | 14 |
| W90 IN 02 HJ 05 | 1/8" -27 NPT | 1/2"-20 UNF | 14 |
| W90 IN 02 HJ 06 | 1/8" -27 NPT | 9/16"-18 UNF | 14 |
| W90 IN 04 HJ | 1/4" -18 NPT | 7/16"-20 UNF | 19 |
| W90 IN 04 HJ 05 | 1/4" -18 NPT | 1/2"-20 UNF | 19 |
| W90 IN 04 HJ 06 | 1/4" -18 NPT | 9/16"-18 UNF | 19 |
| W90 IN 04 HJ 08 | 1/4" -18 NPT | 3/4"-16 UNF | 19 |
| W90 IN 06 HJ | 3/8" -18 NPT | 9/16"-18 UNF | 22 |
| W90 IN 06 HJ 08 | 3/8" -18 NPT | 3/4"-16 UNF | 22 |
| W90 IN 08 HJ | 1/2" -14 NPT | 3/4"-16 UNF | 27 |
| W90 IN 08 HJ 10 | 1/2" -14 NPT | 7/8"-14 UNF | 27 |
| W90 IN 08 HJ 12 | 1/2" -14 NPT | 1.1/16" -12 UN | 27 |
| W90 IN 12 HJ | 3/4" -14 NPT | 1.1/16" -12 UN | 33 |
| W90 IN 16 HJ | 1" -11.5 NPT | 1.5/16" -12 UN | 41 |
| W90 IN 20 HJ | 1.1/4" -11.5 NPT | 1.5/8" -12 UN | 48 |
| W90 IN 24 HJ | 1.1/2" -11.5 NPT | 1.7/8" -12 UN | 64 |
AF = Width across flats
Product versions
This product is also available in the following designs:
- W90 IN HJ VA
- Screw-on socket, IGN AGJ angle 90°, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.