Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
W90 O HJ VA
Screw-in socket, AGJ, angle 90°
Product image
Properties
| Connection 1 |
UN/UNF external threads |
| Sealing form 1 |
O-ring seal on screw-in socket |
| Connection 2 |
UN/UNF external threads |
| Sealing form 2 |
74° outer cone |
| Design |
Adjustable direction screw-in socket |
| Construction |
Angle 90° |
| Material |
Stainless steel |
Item
Sort upwards
Sort downwards
 Identification |
G1 | G2 | AF (mm) |
S1 | OR |
|---|---|---|---|---|---|
| W90 O 04 HJ VA | 7/16"-20 UNF | 7/16"-20 UNF | 11 | 14 | 8.92 x 1.83 |
| W90 O 05 HJ VA | 1/2"-20 UNF | 1/2"-20 UNF | 13 | 16 | 10.52 x 1.83 |
| W90 O 06 HJ 04 VA | 9/16"-18 UNF | 7/16"-20 UNF | 14 | 17 | 11.90 x 1.98 |
| W90 O 06 HJ VA | 9/16"-18 UNF | 9/16"-18 UNF | 14 | 17 | 11.90 x 1.98 |
| W90 O 06 HJ 08 VA | 9/16"-18 UNF | 3/4"-16 UNF | 19 | 17 | 11.90 x 1.98 |
| W90 O 08 HJ VA | 3/4"-16 UNF | 3/4"-16 UNF | 19 | 22 | 16.36 x 2.20 |
| W90 O 08 HJ 06 VA | 3/4"-16 UNF | 9/16"-18 UNF | 19 | 22 | 16.36 x 2.20 |
| W90 O 10 HJ VA | 7/8" -14 UNF | 7/8"-14 UNF | 22 | 27 | 19.18 x 2.46 |
| W90 O 12 HJ VA | 1.1/16" -12 UN | 1.1/16" -12 UN | 32 | 27 | 23.47 x 2.95 |
| W90 O 16 HJ VA | 1.5/16" -12 UN | 1.5/16" -12 UN | 33 | 38 | 29.74 x 2.95 |
SW, S1, S2 = With across flats
Ordering information
Seals of NBR
FPM (Viton) on request
Product versions
This product is also available in the following designs:
- W90 O HJ
- Screw-in socket, AGJ, angle 90°, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.