IBF
Rod seal IBFProduct image
Properties
Design |
Rod U-ring |
Operating pressure |
up to 400 bar |
Sliding speed max. |
0,5 m/s |
Temp. min. |
-30 °C |
Temp. max. |
80 °C |
Media |
Mineral oils |
Installation |
in closed grooves |
Application |
Hydraulics |
Material |
(2) Seal: PUR Support ring: POM |
Description
Low spatial requirement.
High abrasion resistance.
As buffer seal.
Item
Sort upwards
Sort downwards
Identification | D (mm) |
D (mm) |
d (mm) |
L (mm) |
---|---|---|---|---|
IBF 40 | 55,5 | - | 40 | 6,3 |
IBF 50 | 65,5 | - | 50 | 6,3 |
IBF 55 | 70,5 | - | 55 | 6,3 |
IBF 60 | 75,5 | - | 60 | 6,3 |
IBF 65 | 80,5 | - | 65 | 6,3 |
IBF 70 | 85,5 | - | 70 | 6,3 |
IBF 75 | 90,5 | - | 75 | 6,3 |
IBF 80 | 95,5 | - | 80 | 6,3 |
IBF 85 | 100,5 | - | 85 | 6,3 |
IBF 95 | 110,5 | - | 95 | 6,3 |
IBF 100 | 115,5 | - | 100 | 6,3 |
IBF 140 | - | 155 | 140 | 6,3 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.