B NWO-KR
Piston seal B-NWO-KRProduct image
Properties
Design |
piston seal |
Operating pressure |
up to 500 bar |
Sliding speed max. |
0,5 m/s |
Temp. min. |
-30 °C |
Temp. max. |
110 °C |
Media |
Mineral oils Water emulsions |
Installation |
on one-piece pistons |
Material |
(1) Guide ring: acetal resin (2) Seal: fabric-reinforced NBR (4) Seeger ring: acetal resin |
Application |
Hydraulics |
Description
Low spatial requirement.
High resistance to extrusion.
Item
Sort upwards
Sort downwards
Identification | D (mm) |
d (mm) |
L (mm) |
G (mm) |
E (mm) |
R (mm) |
Q (mm) |
---|---|---|---|---|---|---|---|
B 177 118-NWO-KR | 45,0 | 30 | 9,5 | 6,35 | 3,10 | 40,40 | 25,80 |
B 196 118-NWO-KR | 50,0 | 30 | 14,5 | 6,35 | 3,35 | 44,30 | 25,80 |
B 216 157-1-NWO-K | 55,0 | 40 | 11,0 | 6,35 | 3,10 | 50,40 | 35,80 |
B 236 157-NWO-KR | 60,0 | 40 | 14,5 | 6,35 | 3,35 | 54,16 | 36,10 |
B 248 177-NWO-KR | 63,0 | 45 | 11,0 | 6,35 | 3,10 | 58,40 | 40,84 |
B 275 196-NWO-KR | 70,0 | 50 | 14,5 | 6,35 | 3,35 | 64,20 | 45,84 |
B 314 236-NWO-KR | 80,0 | 60 | 14,5 | 6,35 | 3,35 | 74,30 | 55,80 |
B 354 275-NWO-KR | 90,0 | 70 | 14,5 | 6,35 | 3,35 | 84,15 | 66,10 |
B 393 314-NWO-KR | 100,0 | 80 | 14,5 | 6,35 | 3,35 | 94,15 | 75,84 |
B 411 334-NWO-KR | 104,5 | 85 | 13,0 | 6,35 | 3,35 | 98,90 | 81,10 |
B 433 354-1-NWO-K | 110,0 | 90 | 13,0 | 6,35 | 3,10 | 104,15 | 85,90 |
B 452 374-NWO-KR | 115,0 | 95 | 14,5 | 6,35 | 3,35 | 109,90 | 90,50 |
B 492 413-NWO-KR | 125,0 | 105 | 12,5 | 6,35 | 3,35 | 119,15 | 101,00 |
B 629 551-1-NWO-K | 160,0 | 140 | 14,0 | 6,35 | 3,20 | 154,30 | 136,00 |
Ordering information
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.