HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

DSM

Piston packing set for split pistons DSM
Hide product imageProduct image
DSM data/img/product/DSM_1_Zeichnung.jpg - DSM
Hide propertiesProperties
Design piston seal
Operating pressure up to 700 bar
Sliding speed max. 0,5 m/s
Temp. min. -30 °C
Temp. max. 110 °C
Media Mineral oils
Water emulsions
Installation on multi-part pistons
Material (1) Seal: NBR
(2) Guide ring: acetal resin
(3) Support ring: fabric-reinforced NBR
Application Hydraulics
Hide descriptionDescription

Extremely good sealing effect at low pressure.
for difficult working conditions such as hydraulic shocks,
Strong vibrations or poor surfaces.

Hide product tableItem

Sort upwards

Sort downwards

Hide ordering informationOrdering information

For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.