PHD
Piston packing set for one-piece pistons PHD
Product image
![PHD PHD](/data/img/product/PHD_FOTO.jpg)
![PHD - data/img/product/PHD_PHD-PU_1_Zeichnung.jpg data/img/product/PHD_PHD-PU_1_Zeichnung.jpg - PHD](/data/img/product/PHD_PHD-PU_1_Zeichnung.jpg)
Properties
Design |
Piston packing set |
Operating pressure |
up to 400 bar |
Sliding speed max. |
1,5 m/s |
Temp. min. |
30 °C |
Temp. max. |
110 °C |
Media |
Mineral oils Water emulsions |
Installation |
on one-piece pistons A on multi-part pistons B |
Material |
(1) Static seal: NBR (2) Dynamic seal: PTBR (3) Back ring: acetal resin |
Application |
Hydraulics |
Description
Low spatial requirement.
High resistance to extrusion.
High abrasion resistance.
Low-friction seal.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
D (mm) |
d (mm) |
L (mm) |
---|---|---|---|
PHD 50 36 | 50 | 36 | 9,0 |
PHD 55 41 | 55 | 41 | 9,0 |
PHD 60 46 | 60 | 46 | 9,0 |
PHD 60 50 | 60 | 50 | 8,0 |
PHD 63 48 | 63 | 48 | 11,0 |
PHD 65 50 | 65 | 50 | 11,0 |
PHD 70 55 | 70 | 55 | 11,0 |
PHD 75 60 | 75 | 60 | 11,0 |
PHD 80 65 | 80 | 65 | 11,0 |
PHD 85 70 | 85 | 70 | 11,0 |
PHD 90 75 | 90 | 75 | 11,0 |
PHD 95 80 | 95 | 80 | 11,0 |
PHD 100 85 | 100 | 85 | 12,5 |
PHD 105 90 | 105 | 90 | 12,5 |
PHD 110 95 | 110 | 95 | 12,5 |
PHD 115 100 | 115 | 100 | 12,5 |
PHD 120 105 | 120 | 105 | 12,5 |
PHD 125 102 | 125 | 102 | 16,0 |
PHD 130 107 | 130 | 107 | 16,0 |
PHD 135 112 | 135 | 112 | 16,0 |
PHD 140 117 | 140 | 117 | 16,0 |
PHD 145 122 | 145 | 122 | 16,0 |
PHD 150 127 | 150 | 127 | 16,0 |
PHD 160 137 | 160 | 137 | 16,0 |
PHD 165 142 | 165 | 142 | 16,0 |
PHD 180 157 | 180 | 157 | 16,0 |
Ordering information
We are able to produce seals with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.