Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
D11W
Piston packing set for split pistons D11W
Product image
Properties
| Operating pressure |
up to 500 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
110 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
on multi-part pistons |
| Material |
(1) Seal: NBR with fabric reinforcement on both sides (2) Guide ring: acetal resin (3) Support ring: acetal resin / PTBR |
| Application |
Hydraulics |
Description
Extremely good sealing effect at low pressure.
Low spatial requirement.
Simple solution.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
G (mm) |
M (mm) |
P (mm) |
|---|---|---|---|---|---|---|
| D11W 980 47 | 25,00 | 12,00 | 12,40 | 6,35 | 21,45 | 23,73 |
| D11W 150 100 | 38,10 | 25,40 | 16,27 | 6,35 | 34,54 | 37,05 |
| D11W 200 137 | 50,80 | 34,92 | 19,45 | 6,35 | 46,22 | 49,50 |
| D11W 248 185 | 63,00 | 47,00 | 19,40 | 6,35 | 58,40 | 61,65 |
| D11W 250 187 | 63,50 | 47,62 | 19,45 | 6,35 | 58,90 | 62,13 |
| D11W 300 225 | 76,20 | 57,15 | 24,21 | 6,35 | 70,40 | 74,55 |
| D11W 325 250 | 82,55 | 63,50 | 24,21 | 6,35 | 76,73 | 80,90 |
| D11W 354 275-1 | 90,00 | 70,00 | 25,40 | 6,35 | 84,15 | 88,30 |
| D11W 400 325 | 101,60 | 82,55 | 24,21 | 6,35 | 95,76 | 99,90 |
| D11W 413 314 | 105,00 | 80,00 | 22,40 | 6,35 | 98,10 | 103,00 |
| D11W 425 350 | 107,95 | 88,90 | 24,21 | 6,35 | 102,08 | 106,23 |
| D11W 433 334 | 110,00 | 85,00 | 25,40 | 6,35 | 103,10 | 108,00 |
| D11W 433 354 | 110,00 | 90,00 | 25,40 | 6,35 | 104,15 | 108,30 |
| D11W 452 354 | 115,00 | 90,00 | 22,40 | 6,35 | 108,10 | 113,00 |
| D11W 492 393 | 125,00 | 100,00 | 25,40 | 6,35 | 118,10 | 123,00 |
| D11W 492 413 | 125,00 | 105,00 | 25,40 | 6,35 | 119,15 | 123,30 |
| D11W 500 400 | 127,00 | 101,60 | 32,15 | 6,35 | 120,09 | 124,98 |
| D11W 550 450 | 139,70 | 114,30 | 32,15 | 6,35 | 132,77 | 137,65 |
| D11W 551 472 | 140,00 | 120,00 | 25,40 | 6,35 | 134,10 | 138,30 |
| D11W 629 511 | 160,00 | 130,00 | 25,40 | 6,35 | 153,00 | 157,90 |
| D11W 650 550 | 165,10 | 139,70 | 32,15 | 6,35 | 158,12 | 163,01 |
| D11W 708 590 | 180,00 | 150,00 | 35,40 | 6,35 | 172,95 | 177,87 |
| D11W 748 629 | 190,00 | 160,00 | 35,40 | 6,35 | 182,93 | 187,87 |
| D11W 787 669 | 200,00 | 170,00 | 35,40 | 6,35 | 192,96 | 197,84 |
Ordering information
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.