GPK
Piston packing set, GPKProduct image
Properties
Design |
Rod packing set |
Operating pressure |
up to 600 bar |
Sliding speed max. |
1,0 m/s |
Temp. min. |
-30 °C |
Temp. max. |
110 °C |
Media |
Mineral oils Water emulsions |
Installation |
on one-piece pistons |
Material |
(1) Dynamic seal: PA + glass fibre (2) Static seal: NBR |
Application |
Hydraulics |
Description
Low spatial requirement.
High extrusion resistance.
Easy fitting without special tools
High abrasion resistance.
low break-loose torque and dynamic friction
Long service life.
Item
Sort upwards
Sort downwards
Identification | D (mm) |
d (mm) |
L (mm) |
---|---|---|---|
GPK 90-1 | 90 | 69,0 | 8,1 |
GPK 100-1 | 100 | 79,0 | 8,1 |
GPK 110-1 | 110 | 89,0 | 8,1 |
GPK 120-1 | 120 | 99,0 | 8,1 |
GPK 125-1 | 125 | 104,0 | 8,1 |
GPK 130-1 | 130 | 109,0 | 8,1 |
GPK 140 | 140 | 119,0 | 8,1 |
GPK 150 | 150 | 129,0 | 8,1 |
GPK 160 | 160 | 139,0 | 8,1 |
GPK 180 | 180 | 159,0 | 8,1 |
GPK 190 | 190 | 169,0 | 8,1 |
GPK 200 | 200 | 179,0 | 8,1 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.