DDEM
Piston seal DDEM
Product image
![DDEM DDEM](/data/img/product/DDE_DDEM_FOTO.jpg)
![DDEM - data/img/product/DDE_DDEM_DDEM-P_1__Zeichnung.jpg data/img/product/DDE_DDEM_DDEM-P_1__Zeichnung.jpg - DDEM](/data/img/product/DDE_DDEM_DDEM-P_1__Zeichnung.jpg)
Properties
Design |
Piston U-ring |
Operating pressure |
up to 80 bar |
Sliding speed max. |
0,5 m/s |
Design |
Metric |
Temp. min. |
-30 °C |
Temp. max. |
100 °C |
Media |
Mineral oils Water-air |
Installation |
on one-piece pistons A on multi-part pistons B |
Material |
NBR 75° Shore A |
Application |
Hydraulics + pneumatics |
Description
Low-friction seal.
Simple solution.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
D (mm) |
d (mm) |
L (mm) |
H (mm) |
---|---|---|---|---|
DDEM 12 06 | 12,0 | 6,00 | 4,5 | 4,00 |
DDEM 16 10 | 16,0 | 10,00 | 4,5 | 4,00 |
DDEM 20 12 | 20,0 | 12,00 | 6,0 | 5,50 |
DDEM 25 17 | 25,0 | 17,00 | 6,0 | 5,50 |
DDEM 32 24 | 32,0 | 24,00 | 6,0 | 5,50 |
DDEM 40 30 | 40,0 | 30,00 | 7,5 | 7,00 |
DDEM 50 40 | 50,0 | 40,00 | 7,5 | 7,00 |
DDEM 55 45 | 55,0 | 45,00 | 7,5 | 7,00 |
DDEM 60 50 | 60,0 | 50,00 | 7,5 | 7,00 |
DDEM 63 53 | 63,0 | 53,00 | 7,5 | 7,00 |
DDEM 65 55 | 65,0 | 55,00 | 7,5 | 7,00 |
DDEM 70 58 | 70,0 | 58,00 | 9,5 | 8,50 |
DDEM 75 63 | 75,0 | 63,00 | 9,5 | 8,50 |
DDEM 80 68 | 80,0 | 68,00 | 9,5 | 8,50 |
DDEM 85 73 | 85,0 | 73,00 | 9,5 | 8,50 |
DDEM 90 78 | 90,0 | 78,00 | 9,5 | 8,50 |
DDEM 100 088 | 100,0 | 88,00 | 9,5 | 8,50 |
DDEM 105 093 | 105,0 | 93,00 | 9,5 | 8,50 |
DDEM 110 098 | 110,0 | 98,00 | 9,5 | 8,50 |
DDEM 120 105 | 120,0 | 105,00 | 11,0 | 10,00 |
DDEM 125 110 | 125,0 | 110,00 | 11,0 | 10,00 |
DDEM 140 125 | 140,0 | 125,00 | 11,0 | 10,00 |
DDEM 150 135 | 150,0 | 135,00 | 11,0 | 10,00 |
DDEM 160 145 | 160,0 | 145,00 | 11,0 | 10,00 |
DDEM 180 160 | 180,0 | 160,00 | 15,0 | 14,00 |
DDEM 200 180 | 200,0 | 180,00 | 15,0 | 14,00 |
Ordering information
We are able to produce seals with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.