Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
DAS
Piston packing set for one-piece pistons DAS
Product image
Properties
| Design |
Piston packing set |
| Operating pressure |
up to 300 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
110 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
on one-piece pistons A on multi-part pistons B |
| Material |
(1) Seal: NBR (2) Guide ring: acetal resin (3) Support ring: Polyester |
| Application |
Hydraulics |
Description
Extremely good sealing effect at low pressure.
Easy assembly.
Simple solution.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
G (mm) |
M (mm) |
P (mm) |
|---|---|---|---|---|---|---|
| DAS 30 17 | 30 | 17 | 15,4 | 6,35 | 26,50 | 28,50 |
| DAS 40 24 | 40 | 24 | 18,4 | 6,35 | 35,40 | 38,50 |
| DAS 40 30 | 40 | 30 | 16,4 | 6,35 | 35,40 | 38,50 |
| DAS 50 34 | 50 | 34 | 18,4 | 6,35 | 45,41 | 48,66 |
| DAS 60 44 | 60 | 44 | 18,4 | 6,35 | 55,39 | 58,65 |
| DAS 63 47 | 63 | 47 | 18,4 | 6,35 | 58,39 | 61,63 |
| DAS 70 50 | 70 | 50 | 22,4 | 6,35 | 64,18 | 68,34 |
| DAS 80 60 | 80 | 60 | 22,4 | 6,35 | 74,16 | 78,34 |
| DAS 90 70 | 90 | 70 | 22,4 | 6,35 | 84,15 | 88,31 |
| DAS 100 75 | 100 | 75 | 22,4 | 6,35 | 93,14 | 98,05 |
| DAS 110 85 | 110 | 85 | 22,4 | 6,35 | 103,10 | 108,00 |
| DAS 125 100 | 125 | 100 | 25,4 | 6,35 | 118,08 | 122,96 |
| DAS 130 105 | 130 | 105 | 25,4 | 9,50 | 122,60 | 127,50 |
| DAS 140 115 | 140 | 115 | 25,4 | 9,50 | 132,60 | 137,50 |
| DAS 150 125 | 150 | 125 | 25,4 | 9,50 | 142,60 | 147,50 |
| DAS 160 135 | 160 | 135 | 25,4 | 9,50 | 152,60 | 157,50 |
| DAS 180 155 | 180 | 155 | 25,4 | 12,70 | 171,72 | 177,10 |
| DAS 200 175 | 200 | 175 | 25,4 | 12,70 | 191,62 | 197,00 |
| DAS 220 195 | 220 | 195 | 25,4 | 12,70 | 211,62 | 217,00 |
Ordering information
Alternative material possible: FPM.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.