Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
EGRP A
Piston packing set, EGRP
Product image
Properties
| Operating pressure |
up to 700 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-40 °C |
| Temp. max. |
120 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
on one-piece or multi-part pistons |
| Material |
Dynamic seal: PTFE (2) Static seal: NBR |
Description
Low spatial requirement.
High extrusion resistance.
Long service life.
low break-loose torque and dynamic friction
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
|---|---|---|---|
| EGRP 0400 A554470 | 40 | 24,5 | 6,3 |
| EGRP 0500 A554470 | 50 | 34,5 | 6,3 |
| EGRP 0600 A554470 | 60 | 44,5 | 6,3 |
| EGRP 0630 A554470 | 63 | 47,5 | 6,3 |
| EGRP 0650 A554470 | 65 | 49,5 | 6,3 |
| EGRP 0700 A554470 | 70 | 54,5 | 6,3 |
| EGRP 0800 A554470 | 80 | 59,0 | 8,1 |
| EGRP 0900 A554470 | 90 | 69,0 | 8,1 |
| EGRP 1000 A554470 | 100 | 79,0 | 8,1 |
| EGRP 1100 A554470 | 110 | 89,0 | 8,1 |
| EGRP 1200 A554470 | 120 | 99,0 | 8,1 |
| EGRP 1250 A554470 | 125 | 104,0 | 8,1 |
| EGRP 1300 A554470 | 130 | 109,0 | 8,1 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.