Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
EUD
Piston packing set for one-piece pistons EUD
Product image
Properties
| Design |
Piston packing set |
| Operating pressure |
up to 400 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oils |
| Installation |
on one-piece pistons A on multi-part pistons B |
| Material |
(1) Dynamic seal: PUR (2) Static seal: NBR (3) Guide ring: acetal resin |
| Application |
Hydraulics |
Description
Extremely good sealing effect at low pressure.
Low spatial requirement.
Easy assembly.
Simple solution.
High abrasion resistance.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
G (mm) |
M (mm) |
P (mm) |
|---|---|---|---|---|---|---|
| EUD 60 48 | 60 | 48 | 20,5 | 4,20 | 56 | 59,4 |
| EUD 63 51 | 63 | 51 | 20,5 | 4,20 | 59 | 62,4 |
| EUD 70 58 | 70 | 58 | 20,5 | 4,20 | 66 | 69,4 |
| EUD 80 66 | 80 | 66 | 22,5 | 5,20 | 76 | 79,4 |
| EUD 100 86 | 100 | 86 | 22,5 | 5,20 | 96 | 99,4 |
| EUD 110 96 | 110 | 96 | 22,5 | 5,20 | 106 | 109,4 |
| EUD 125 108 | 125 | 108 | 26,5 | 7,20 | 121 | 124,4 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.