Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-RUNDZYLINDER DOPP O E D
Round cylinders, double acting, magnetic, non-cushioned
Product image
Properties
| Media |
Filtered (50 μm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
| Working pressure |
Max. 10 bar |
| Set pressure |
0,6 bar |
| Temp. range |
-10 °C to +60 °C |
| Design |
Connection: Aluminium pipe / end caps flanged |
| Piston rod |
Stainless steel 1.4301 (Ø 16), C45 steel, hard chrome-plated (Ø 20 and Ø 25) |
| Pipe |
Aluminium alloy, anodised |
| Cover, floor, guide bush |
Technopolymer |
| Piston rod seal |
PU |
| Piston seal |
PU |
Description
Economy standard version with aluminum pipe and magnet piston.
Note
Maxiumum recommended stroke: Ø 16 = stroke 200, Ø 20 and Ø 25 = stroke 500. Longer strokes can result in malfunctions.
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Ø piston | Stroke (mm) |
Connection | Piston rod thread |
|---|---|---|---|---|
| K- 07 15 17 62 | 16 mm | 10 | M 5 | M 6 |
| K- 07 15 17 63 | 16 mm | 25 | M 5 | M 6 |
| K- 07 15 17 64 | 16 mm | 50 | M 5 | M 6 |
| K- 07 15 17 65 | 16 mm | 80 | M 5 | M 6 |
| K- 07 15 17 66 | 16 mm | 100 | M 5 | M 6 |
| K- 07 15 17 67 | 16 mm | 125 | M 5 | M 6 |
| K- 07 15 17 68 | 16 mm | 160 | M 5 | M 6 |
| K- 07 15 17 69 | 16 mm | 200 | M 5 | M 6 |
| K- 07 15 17 70 | 20 mm | 10 | G 1/8 | M 8 |
| K- 07 15 17 71 | 20 mm | 25 | G 1/8 | M 8 |
| K- 07 15 17 72 | 20 mm | 50 | G 1/8 | M 8 |
| K- 07 15 17 73 | 20 mm | 80 | G 1/8 | M 8 |
| K- 07 15 17 74 | 20 mm | 100 | G 1/8 | M 8 |
| K- 07 15 17 75 | 20 mm | 125 | G 1/8 | M 8 |
| K- 07 15 17 76 | 20 mm | 160 | G 1/8 | M 8 |
| K- 07 15 17 77 | 20 mm | 200 | G 1/8 | M 8 |
| K- 07 15 17 78 | 20 mm | 250 | G 1/8 | M 8 |
| K- 07 15 17 79 | 20 mm | 500 | G 1/8 | M 8 |
| K- 07 15 17 80 | 25 mm | 10 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 81 | 25 mm | 25 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 82 | 25 mm | 50 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 83 | 25 mm | 80 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 84 | 25 mm | 100 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 85 | 25 mm | 125 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 86 | 25 mm | 160 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 87 | 25 mm | 200 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 88 | 25 mm | 250 | G 1/8 | M 10 x 1.25 |
| K- 07 15 17 89 | 25 mm | 500 | G 1/8 | M 10 x 1.25 |
Additional information
Important: The scope of supply does not include a connector. Please order separately.
Accessories
- K-FUSSBEFESTIGUNG 5
- Foot model
- K-FLANSCHBEFESTIGUNGEN1
- Flange model
- K-KOPFMUTTER DECKEL BODEN 2
- Hexagon nut (for head)
- K-KOLST MUTTERN
- Rod nut
- K-GABELKOEPFE 3
- Fork model
- K-GELENKAUGEN 2
- Rod eye model
- K-SCHWENKLAGER 1
- Counter-hinge model
- K-SENSORHALTER
- Sensor support (with T-slot adapter)
- K-SENSOREN T-NUT 5
- DSL reed sensor
- K-SENSOREN T-NUT 1
- Sensor for T-slot
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.