Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PHD PU
Piston packing set for one-piece pistons PHD-PU
Product image
Properties
| Design |
Piston packing set |
| Operating pressure |
up to 400 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
30 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
on one-piece pistons A on multi-part pistons B |
| Material |
(1) Static seal: NBR (2) Dynamic seal: PU (3) Back ring: acetal resin |
| Application |
Hydraulics |
Description
Low spatial requirement.
High abrasion resistance.
Low-friction seal.
High resistance to extrusion.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
|---|---|---|---|
| PHD 100 85-PU | 100 | 85 | 12,5 |
| PHD 110 95-PU | 110 | 95 | 12,5 |
Ordering information
We are able to produce seals with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.