DBM FPM
Piston packing set for one-piece pistons DBM-FPM
Product image
![DBM FPM DBM FPM](/data/img/product/DAS_DBM_FOTO.jpg)
![DBM FPM - data/img/product/DAS_DBM_DBM-NEO_1_Zeichnung.jpg data/img/product/DAS_DBM_DBM-NEO_1_Zeichnung.jpg - DBM FPM](/data/img/product/DAS_DBM_DBM-NEO_1_Zeichnung.jpg)
Properties
Design |
Piston packing set |
Operating pressure |
up to 300 bar |
Sliding speed max. |
0,5 m/s |
Temp. min. |
-30 °C |
Temp. max. |
110 °C |
Media |
Mineral oils Water emulsions |
Installation |
on one-piece or multi-part pistons |
Material |
(1) Seal: FPM (2) Guide ring: acetal resin (3) Support ring: Polyester |
Application |
Hydraulics |
Description
Extremely good sealing effect at low pressure.
Easy assembly.
Simple solution.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
D (mm) |
d (mm) |
L (mm) |
G (mm) |
M (mm) |
P (mm) |
---|---|---|---|---|---|---|
DBM 157 118 FPM | 40 | 30 | 16,4 | 6,35 | 35,40 | 38,50 |
DBM 196 133 FPM | 50 | 34 | 18,4 | 6,35 | 45,41 | 44,66 |
DBM 236 173 FPM | 60 | 44 | 18,4 | 6,35 | 55,39 | 58,65 |
DBM 248 185 FPM | 63 | 47 | 18,4 | 6,35 | 58,39 | 61,63 |
DBM 275 196 FPM | 70 | 50 | 22,4 | 6,35 | 64,18 | 68,34 |
DBM 314 236 FPM | 80 | 60 | 22,4 | 6,35 | 74,16 | 78,34 |
DBM 393 295 FPM | 100 | 75 | 22,4 | 6,35 | 93,14 | 98,05 |
Ordering information
Alternative material possible
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.