Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
DDEM P
Piston seal, DDEM-P
Product image
Properties
| Design |
Piston U-ring |
| Operating pressure |
up to 16 bar |
| Sliding speed max. |
1,0 m/s |
| Design |
Metric |
| Temp. min. |
-30 °C |
| Temp. max. |
80 °C |
| Media |
Air |
| Installation |
on one-piece pistons A on multi-part pistons B |
| Material |
PUR 90° Shore A |
| Application |
Hydraulics + pneumatics |
Description
Low-friction seal.
Simple solution.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
|---|---|---|---|
| DDEM 20 14-P | 20 | 14 | 4,5 |
| DDEM 25 17-P | 25 | 17 | 5,5 |
| DDEM 32 24-P | 32 | 24 | 6,0 |
| DDEM 40 30-P | 40 | 30 | 7,5 |
| DDEM 50 40-P | 50 | 40 | 7,5 |
| DDEM 55 45-P | 55 | 45 | 7,5 |
| DDEM 60 50-P | 60 | 50 | 7,5 |
| DDEM 63 53-P | 63 | 53 | 7,5 |
| DDEM 65 55-P | 65 | 55 | 7,5 |
| DDEM 70 58-P | 70 | 58 | 9,5 |
| DDEM 75 63-P | 75 | 63 | 9,5 |
| DDEM 80 68-P | 80 | 68 | 9,5 |
| DDEM 85 73-P | 85 | 73 | 9,5 |
| DDEM 90 78-P | 90 | 78 | 9,5 |
| DDEM 000 88-P | 100 | 88 | 9,5 |
| DDEM 100 95-P | 110 | 95 | 11,0 |
| DDEM 201 05-P | 120 | 105 | 11,0 |
| DDEM 25 110-P | 125 | 110 | 11,0 |
| DDEM 60 145-P | 160 | 145 | 11,0 |
| DDEM 80 160-P | 180 | 160 | 15,0 |
| DDEM 00 180-P | 200 | 180 | 15,0 |
Ordering information
We are able to produce seals with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.