Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GPS
Piston packing set, GPS
Product image
Properties
| Design |
Piston packing set |
| Operating pressure |
up to 400 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oils |
| Installation |
on one-piece pistons A on multi-part pistons B |
| Material |
(1) Dynamic seal: PUR (2) Static seal: NBR |
| Application |
Hydraulics |
Description
Easy assembly.
Low spatial requirement.
Extremely good sealing effect.
High abrasion resistance.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
Standard grooves |
|---|---|---|---|---|
| GPS 25 | 25 | 14,0 | 4,2 | ISO 5597 |
| GPS 25-1 | 25 | 17,5 | 3,2 | ISO 5597 |
| GPS 30 | 30 | 22,5 | 3,2 | ISO 5597 |
| GPS 32 | 32 | 21,0 | 4,2 | ISO 5597 |
| GPS 32-1 | 32 | 24,5 | 3,2 | ISO 5597 |
| GPS 35 | 35 | 27,5 | 3,2 | - |
| GPS 40 | 40 | 24,5 | 6,3 | - |
| GPS 40-1 | 40 | 29,0 | 4,2 | ISO 5597 |
| GPS 40-2 | 40 | 32,5 | 3,2 | - |
| GPS 45 | 45 | 29,5 | 6,3 | - |
| GPS 45-1 | 45 | 34,0 | 4,2 | - |
| GPS 49 | 49 | 38,0 | 4,2 | - |
| GPS 50 | 50 | 34,5 | 6,3 | ISO 5597 |
| GPS 50-1 | 50 | 39,0 | 4,2 | ISO 5597 |
| GPS 55 | 55 | 39,5 | 6,3 | - |
| GPS 55-1 | 55 | 44,0 | 4,2 | - |
| GPS 60 | 60 | 44,5 | 6,3 | - |
| GPS 60-1 | 60 | 49,0 | 4,2 | - |
| GPS 63 | 63 | 47,5 | 6,3 | ISO 5597 |
| GPS 63-1 | 63 | 52,0 | 4,2 | ISO 5597 |
| GPS 65 | 65 | 49,5 | 6,3 | - |
| GPS 65-1 | 65 | 54,0 | 4,2 | - |
| GPS 70 | 70 | 54,5 | 6,3 | - |
| GPS 70-1 | 70 | 59,0 | 4,2 | - |
| GPS 75 | 75 | 59,5 | 6,3 | - |
| GPS 75-1 | 75 | 64,0 | 4,2 | - |
| GPS 80 | 80 | 64,5 | 6,3 | - |
| GPS 80-1 | 80 | 69,0 | 4,2 | - |
| GPS 85 | 85 | 69,5 | 6,3 | - |
| GPS 90 | 90 | 74,5 | 6,3 | - |
| GPS 100 | 100 | 84,5 | 6,3 | ISO 5597 |
| GPS 105 | 105 | 89,5 | 6,3 | - |
| GPS 110 | 110 | 94,5 | 6,3 | - |
| GPS 120 | 120 | 104,5 | 6,3 | - |
| GPS 125 | 125 | 109,5 | 6,3 | ISO 5597 |
| GPS 130 | 130 | 114,5 | 6,3 | - |
| GPS 140 | 140 | 119,0 | 8,1 | - |
| GPS 150 | 150 | 129,0 | 8,1 | - |
| GPS 160 | 160 | 139,0 | 8,1 | ISO 5597 |
| GPS 170 | 170 | 149,0 | 8,1 | - |
| GPS 180 | 180 | 159,0 | 8,1 | - |
| GPS 200 | 200 | 179,0 | 8,1 | ISO 5597 |
Ordering information
We are able to produce seals with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.