Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GPS LP
Piston packing set, GPS-LP
Product image
Properties
| Operating pressure |
up to 400 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oils |
| Installation |
on one-piece pistons A on multi-part pistons B |
| Material |
(1) Dynamic seal: PUR (2) Static seal: NBR |
Description
Easy assembly.
Low spatial requirement.
High abrasion resistance.
Extremely good sealing effect.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
|---|---|---|---|
| GPS 35-1-LP | 35,00 | 24,00 | 4,2 |
| GPS 38-LP | 38,00 | 30,50 | 3,2 |
| GPS 130-1-LP | 130,00 | 109,00 | 8,1 |
Ordering information
We are able to produce seals with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.