Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
RSE AE
Piston seal RSE-AE
Product image
Properties
| Design |
Piston U-ring |
| Operating pressure |
up to 500 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oils |
| Installation |
on one-piece pistons A on multi-part pistons B |
| Material |
(2) Seal: PUR (2) Support ring: acetal resin / PTBR |
| Application |
Hydraulics |
Description
High abrasion resistance.
Good tightness.
Simple solution.
Note
The piston seals are not suitable for double-acting pistons. Please contact us.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
Profile | Standard grooves |
|---|---|---|---|---|---|
| RSE 40 25-AE | 40 | 25 | 9,5 | B | ISO 5597 |
| RSE 50 35-AE | 50 | 35 | 9,5 | B | ISO 5597 |
| RSE 60 45-AE | 60 | 45 | 9,5 | A | ISO 5597 |
| RSE 63 48-AE | 63 | 48 | 9,5 | B | ISO 5597 |
| RSE 70 50-AE | 70 | 50 | 12,5 | A | - |
| RSE 80 60-AE | 80 | 60 | 12,5 | B | ISO 5597 |
| RSE 90 70-AE | 90 | 70 | 12,5 | B | ISO 5597 |
| RSE 100 80-AE | 100 | 80 | 12,5 | B | ISO 5597 |
| RSE 110 90-AE | 110 | 90 | 12,5 | B | ISO 5597 |
| RSE 125 100-AE | 125 | 100 | 15,5 | B | ISO 5597 |
| RSE 140 115-AE | 140 | 115 | 15,5 | A | ISO 5597 |
| RSE 140 120-AE | 140 | 120 | 12,5 | B | - |
| RSE 160 140-AE | 160 | 140 | 12,5 | B | - |
| RSE 200 170-AE | 200 | 170 | 19,0 | A | ISO 5597 |
| RSE 200 175-AE | 200 | 175 | 16,0 | A | - |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.