TDO
Complete piston TDOProduct image
Properties
Design |
Complete pistons |
Operating pressure |
up to 40 bar |
Sliding speed max. |
0,5 m/s |
Temp. min. |
-30 °C |
Temp. max. |
110 °C |
Media |
Mineral oils Water-air |
Installation |
push onto piston recess with the rubber side and affix with washer and nut. |
Material |
NBR 85° Shore A, with steel core |
Application |
Hydraulics |
Description
Complete pistons.
Item
Sort upwards
Sort downwards
Identification | D (mm) |
d (mm) |
P (mm) |
E (mm) |
e (mm) |
---|---|---|---|---|---|
TDO 26 | 26 | 8,2 | 15,0 | 22 | 3,0 |
TDO 30 | 30 | 8,2 | 16,0 | 22 | 3,0 |
TDO 35 | 35 | 8,2 | 20,0 | 26 | 3,0 |
TDO 40 | 10 | 10,2 | 20,0 | 22 | 3,0 |
TDO 45 | 45 | 10,2 | 22,0 | 25 | 4,0 |
TDO 50 | 50 | 10,2 | 27,0 | 25 | 4,0 |
TDO 55 | 55 | 10,2 | 32,0 | 25 | 4,0 |
TDO 60 | 60 | 12,2 | 37,0 | 26 | 4,0 |
TDO 63 | 63 | 12,2 | 40,0 | 25 | 4,0 |
TDO 70 | 70 | 12,2 | 44,0 | 30 | 5,0 |
TDO 80 | 80 | 12,2 | 54,0 | 30 | 5,0 |
TDO 100 | 100 | 12,2 | 72,0 | 35 | 6,0 |
TDO 110 | 110 | 12,2 | 78,0 | 40 | 6,0 |
TDO 115 | 115 | 20,2 | 83,0 | 30 | 8,0 |
TDO 125 | 125 | 20,2 | 85,0 | 40 | 8,0 |
TDO 140 | 140 | 20,2 | 100,0 | 40 | 10,0 |
TDO 150 | 150 | 20,2 | 105,0 | 40 | 10,0 |
TDO 200 | 200 | 20,2 | 146,0 | 40 | 10,0 |
TDO 250 | 250 | 30,2 | 200,0 | 40 | 12,0 |
TDO 300 | 300 | 35,2 | 250,0 | 40 | 12,0 |
Ordering information
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.