Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
RSE W
Piston seal RSE-W
Product image
Properties
| Design |
Piston U-ring |
| Operating pressure |
up to 400 bar |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oils |
| Installation |
on one-piece pistons |
| Material |
(1) Guide ring: acetal resin (2) Seal: PUR |
| Application |
Hydraulics |
Description
High abrasion resistance.
Good tightness.
Simple solution.
Item
Sort upwards
Sort downwards
 Identification |
D (mm) |
d (mm) |
L (mm) |
G (mm) |
R (mm) |
|---|---|---|---|---|---|
| RSE 32 20-W | 32 | 20 | 9,0 | 6,35 | 28,50 |
| RSE 40 25-W | 40 | 25 | 9,5 | 6,35 | 35,40 |
| RSE 45 35-W | 45 | 35 | 9,5 | 6,35 | 40,40 |
| RSE 60 40-W | 60 | 40 | 14,5 | 6,35 | 55,40 |
| RSE 65 50-W | 65 | 50 | 11,0 | 6,35 | 60,40 |
| RSE 70 50-W | 70 | 50 | 14,5 | 6,35 | 64,20 |
| RSE 80 60-W1 | 80 | 60 | 14,5 | 6,35 | 74,15 |
| RSE 90 70-W1 | 90 | 70 | 14,5 | 6,35 | 84,15 |
| RSE 100 80-W | 100 | 80 | 14,5 | 6,35 | 93,15 |
Ordering information
We are able to produce seals with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.